Welcome to Quad Dream Trading L.L.C
CALL US / FAX
  • Location
    DUBAI, UAE
  • Office Timing
    SAT - THU 8:00 AM - 5:00 PM
  • +971 42637784
Home CUPLOCK SYSTEM
SCAFFOLDING CUPLOCK SYSTEM

The pipe is of Hot Rolled Steel as per BS-1139 Standard, The Jack Nut of SG Iron Castings. Made from pipe of 38mm OD X 650mm Height. 

The Pipe of Hot Rolled Steel as per BS-1139 Standard. Made from Pipe of 48mm OD, 4mm or 3.2mm.

The Pipe of Hot Rolled Steel as per BS-1139 Standard.Made from Pipe of 48 mm OD, 4 mm or 3.2 mm

The Pipe of Hot Rolled Steel as per BS-1139 Standard.Made from Pipe of 48mm OD, 4mm or 3.2mm

The Pipe of Hot Rolled Steel as per BS-1139 Standard .Made from Pipe of 38mm OD X 4mm and height is 300mm, Available with a pair of Bolts and Nuts.

The Pipe of Hot Rolled Steel as per BS-1139 Standard. Made from Pipe of 38mm X 4mm and Height of 300mm and a washer is welded at the center.

The Pipe of Hot Rolled Steel as per BS-1139 Standard. Made from 48.3mm X 3.2mm pipe.

Hot dipped, galvanized, painted ladder beam made of pipe of diameter 48.3 mm with thickness 3mm to 4 mm.Available in 6 m.

The Pipe of Hot Rolled Steel as per BS-1139 Standard.Made from 48.3mm X 3.2mm pipe.

The Pipe of Hot Rolled Steel as per BS-1139 Standard. Made from 38mm X 4mm pipe, 650mm length.

The Pipe of Hot Rolled Steel as per BS-1139 Standard. Made from 38mm X 4mm pipe, 650mm length.

The Pipe of Hot Rolled Steel as per BS-1139 Standard. Made from 38mm X 4mm pipe, 100mm length.

The Pipe of Hot Rolled Steel as per BS-1139 Standard. Made from 48.3mm X 3.2mm pipe, the height is 100mm.

The Main component of the Decking System, used over each standard with a socket adoptor. Made from Sheeted components, The Critical Height is 70mm.

The Primary Beam that is used with the Drop Head to form the Decking System. Made from Sheeted components, used with Drop head, the sheet thickness is 3mm.

The Secondary Beam used with the Decking Beam to form the Decking System. Made from Sheeted Components, used with Decking beams and the sheet thickness is 2mm.

"This is used to hold the Primary and the Secondary I-sections together. Made from 4mm thick sheet with the Carriage bolt of M12 X125 mm. Base Plate"

Made from Plate of Low carbon steel to support the Standards and Ledgers. Made from pipe of 38mm X 100mm, welded with a plate of 150 X 150 X 6 mm.

Made from Pipe joint with the plate with fasteners so that we can move the pipe in 180 degrees. Made from pipe of 38mm X 4mm X 650mm Height.

Made from low carbon steel and used above the standard to support the wooden I- Sections for 2 beams of 80mm width.

Made from Malleable Casting. Top Cup is available for the pipe of 48.3mm OD and in 3lugs and 4lugs.

Made from Low Carbon Steel Bottom Cup is available for the pipe of 48.3mm OD.

Made from Forged Steel. Ledger Plate is available for the pipe of 48.3mm OD.

Made From Forged Steel. Used With 48.3mm Scaffolding Pipe.

Made From Forged Steel. Available for 48.3mm Scaffolding Pipe

Made of Ductile Casting of 400/12 Grade. 38mm Diameter.